New Challenge - High Water Level Siphon Outlet

Been thinking all night yesterday and today I made another outlet for this high level situation on my Aquaponics system. If you don't have same high water problem its not required for your installation.


I use Tee join and an aerator tongue to give aeration and cutting siphon without problem. Photo below is the items require for making it.


From left: 25mm/1" PVC pipe with holes drilled in it, the length is up to you. 15mm PVC pipe about 4 inches cut diagonally with holed end cap on the end. 20~25mm adapter to hold the 15mm PVC pipe, you can use other means to hold the 15mm pipe. and a 25mm Tee.
Photo above the 15mm PVC jammed into the adapter.  Below the attachment installed to siphon outlet.
As below siphon activated bubbles and cut off with little problem.
Below is the video of this attachment and how its made.

So far its good I am monitoring it closely for this next few days.


Attach is diagram of the siphon outlet.


With this last bit, I guess my siphon is complete from top to bottom.


Cheers

23 comments:

  1. good work..

    em.time puasa lagi pantas postingnya..he.

    thanks

    ReplyDelete
  2. Cuti MET,, apa nak buat... duduk rumah melangut ajer..

    ReplyDelete
  3. Nice idea! Any ideas as to how to combine this with your swivel valve (loop siphon modified)?

    ReplyDelete
  4. @frederickjh that's an interesting idea, may be difficult to do.

    ReplyDelete
  5. Affnan, can you explain why the breather is necessary? Does it improve the siphon action or are you using it simply to aerate the water?

    ReplyDelete
  6. Hi Averan,
    Breather provide aeration and at same time ensure positive siphon cut-off. The main reason is to provide aeration with the later as a bonus to this design.

    ReplyDelete
  7. Hi Affnan, can you explain why the breather got only small hole?..didn't it easier to use a "Tee" instead?

    ReplyDelete
    Replies
    1. It's just to prevent water splash, that's all. Since its only need to allow air a small hole will do, not a problem to make it bigger as I said earlier just to prevent water splash.

      One nice thing I got from the smaller hole is the whistling effect. :)

      Delete
    2. i see..comparing the "burb-ing effect" the whistling effect sounds fun... :)

      Well, i've tried using [just] a tee earlier, but in result it reducing the power of the siphon so does its speed, as the more bend in the outlet will slowing down the water drainage speed, so i'm not using it anymore.

      By the way, nice blog affnan...and Selamat Hari Raya.

      Delete
  8. I really enjoy seeing your system work, very inspiring! Perhaps using a "Y" connector like this: https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSOndoL48nBstZJnG0I7S1Ih8FALiMNO0X9gAMRxfZwHA1PpixE would be a simpler option? If there's any water splash you could cover the side opening with tape and then cut out a smaller opening. This way no elbows are needed either, you can feed straight down from the bed if that would work better.

    ReplyDelete
  9. I was really enjoying reading this blog filled with lots of nice things and the advices for plumbing. Thanks plumber Brighton

    ReplyDelete
  10. The blogging scene has become more worldwide than ever, with a vast array of competitive topics. Even with the ever-rising social networks, the BLOG will always have its distinct place on the Internet. In retrospect, what platforms are more widely used than others.Casual Shoes men

    ReplyDelete
  11. One line exceptional Introduction: Designed with consideration, the Rain-X 5079281-2 Latitude 2-IN-1 Water Repellency Wiper Blades are a standout amongst the best accessible wipers that can enable you to make a sheltered path through unfriendly climate conditions.. Presentation: Rain rain x latitude review

    ReplyDelete
  12. outsourcingall.com "Usually I never comment on blogs but your article is so convincing that I never stop myself to say something about it.
    This paragraph gives clear idea for the new viewers of blogging, Thanks you. You’re doing a great job Man, Keep it up.
    outsourcing training

    ReplyDelete
  13. outsourcingall.com "Usually I never comment on blogs but your article is so convincing that I never stop myself to say something about it.
    This paragraph gives clear idea for the new viewers of blogging, Thanks you. You’re doing a great job Man, Keep it up.
    outsourcing training

    ReplyDelete
  14. This is Very very nice article. Everyone should read. Thanks for sharing. Don't miss WORLD'S BEST CarGame

    ReplyDelete
  15. Thanks for taking the time to discuss this, I feel strongly about it and adore finding out additional on this topic. If feasible, as you acquire expertise, would you thoughts updating your blog with much more details? It is extremely useful for me. topusgirl

    ReplyDelete
  16. You can learn from the help of our blog on how safe Is MS Office safe for the workplace. Click on the following link to read more about "How Safe Is MS Office Safe for the workplace"

    ReplyDelete
  17. A great content material as well as great layout. Your website deserves all of the positive feedback it’s been getting. I will be back soon for further quality contents. hypoallergenic mattress pads

    ReplyDelete
  18. Really very happy to say, your post is very interesting to read. I never stop myself to say something about it. You’re doing a great job.Keep it up
    office.com/setup

    ReplyDelete
  19. Jio Lottery Winner 2020 providing lottery offers for Indians in 2020.

    ReplyDelete
  20. I get to know about the Garmin Map from one of my friend, he told me how efficiently it works. Now its been a year since I am using Garmin Express. I can recommend everyone to try Garmin GPS and make their experience as great as mine. For any information call +1-888-309-0939 for instant help from Garmin GPS experts.
    Garmin.com/Express

    ReplyDelete