Siphon Sets Done

Four set done, what left are just final outlets and installation which needs to be done on site.



Above are siphon top parts, those eight tubes in front four of which of same length are stand pipe extender to adjust water level in grow bed. Below are the outer strainer tubes, these are 110 mm uPVC pipes with end venting cap.



80 mm water PVC tubes with end cap forming the bell. Those half moon are formed using 25 mm hole saw, cutting two halves at a go making two bell tubes. So the half moon are roughly half inch high.


Stand pipe, 25 mm bulk head fitting drilled with 4mm drip hole, then 25mm PVC tube with final 25 mm ~ 50 mm reducer to make total length from drip hole to reducer to about 7.5 inches.


Extender tubes below, two sets for each stand pipe, the longer will bring water level to about 11 inches and the shorter to 9 inches. So the stand pipe are adjustable to 7.5, 9 and 11 inches.

  
Initial outlet below about 8 inches before the elbow, other item need to be done on site or after I had a look at how is the final installation.



These siphon sets are for new set that will be build early January, I just had it ready for installation when they need it.

Outer Strainer Done

Slowly but surely the outer strainer done, its a 110mm PVC pipe normally use for sewage or rain water gutter outlet.



Four pieces for  four Siphon set, those holes are 10mm using tile drill bit to make. This strainer is for 12" media growbed maximum height. I'll finish the bell tube next.

New set of Siphon.

Making 4 set of siphon for some one, I'll do the installation on the growbed. Hope fully this is a start of something great.


Cutting 4 strainer tubes and siphon bell (Grey tube) for 4 bell as well, which will be cut by making few circulars cutting around halfway its length making 2 bell tube in one go. Lots more to do, those strainer holes need to be drill onto the white tube.

I just submitted my house renovation completion paperwork to the Authority and hope the building inspector will come as soon as possible. After they had inspected my house renovation than I will be able to make a new Aquaponics set for myself.  Otherwise those extra stuff outside at the back of the house may land me in trouble.

Its been ages...

New Scooters

OK I love bikes,, and has many over the years.. nowadays Scooter are the best for running around town or going to work as in my previous post on commuting scooter : Here with Amir on it.



Got myself a bigger bike the Kawasaki Versys 650 for longer distance and keep the scooter as commuting bike, its a great bike this Kawasaki. A friend of mine took this Versys from Kuala Lumpur to London over land via China Mainland without any problem.



Finally been idling for a while these bike, I decide to change to a smaller scooter and a whooper.. :) So get rid of the SYM 200 VTS Scooter and the Versys and got my self this tiny .. SYM VS 150 or the Excel II as its called in Australia.. Its new old stock got it for a bargain about USD1300.00 its a steal.



For the Whopper got this..... Grand Daddy of all maxi scooter.....



The BMW C600 Sport.. its a 650 cc Twin super fast.. and probably the first unit over here .. :) This scooter is a self reward for commuting to work these last 30 years on bike..

Recent Comment Widget Broken :(

The recent comment Widget is broken.. and its still not fixed.
This makes it very difficult for me to answer any comment on previous post. Hope they fix it soon.