Water Flow Gauge

Making this simple device to measure water inflow to growbed. This is helpful since I can then document siphon water operating range. which now is not so accurately done.

I use the Bettas BT 6000 pump as the water source and a mechanical flow rate gauge utilizing float type weight to shows water flow rate.

Two stop cock use, one as diverter and the other just to provide restriction just incase the diversion is not enough.

Below a short video presentation of the flow tester.

6 comments:

  1. En affnan kat mana nak dapat flow gauge

    ReplyDelete
  2. En affnan kat mana nak dapat flow gauge

    ReplyDelete
  3. Kat mana nak beli water flow gauge ni

    ReplyDelete
  4. Kat mana nak beli water flow gauge ni

    ReplyDelete
  5. This is an amazing post I seen on account of offer it. It is genuinely what I expected to see trust in future you will continue in sharing such an awesome post. 3D printed foundry molds

    ReplyDelete

Dear Reader,

I am temporarily disabling comment for maintenance of this blog site.

Thank you.

Affnan Aquaponics

Note: only a member of this blog may post a comment.