What will happen if you have too high water level in the growbed?
Initially high water level will cause higher evaporation and water will be use more due to this. To ensure this don't happen it is recommended that the water level is at least 1 inch below the hydroton or media level.
Above photo the water level is about 1 inch below the hydroton and it is just nice for most setup.
What else could happen?
Algae and some time moss will grow, moss could turn into fern in some cases. Algae and mosses will compete with plants for nutrient and it also will make the growbed looks dirty as below.
As a general rule 1 inch water below the media is acceptable, this is the DryZone of an aquaponics growbed. This DryZone can be thicker depending on type of plants grown.
A siphon with adjustable standpipe height is helpful in ensuring this water level is easily achieved.
Wednesday, 23 September 2015
Aquaponics Tips - Chelated Iron
Chelated Iron like Fe 13% EDTA are use in agriculture as a supplement to ensure yellowing leaves don't occur and enhance production of chlorophyll in leaves. They can be use as a foliar spray either on its own or mixed with common pesticide. It can also be administered through fertigation solution.
Fe EDTA in aquaponics we add to growbed either to the growbed or the fish tank. I would recommend the earlier since it will not be directly available to the fish in it undissolved form that those hungry fishes think it's fish food.
How much to add? As home setup I must say, I add only as much as it's required. They are extensive post in forums about how much to add with volume of water in your system etc but I don't bothered about it.
In aquaponics, water is constantly circulating so like ammonia in the fish tank iron will be continuously circulated in the system and the plants will uses as it needs. It is not like the foliar or fertigation method that may be excessive hence wastage upon application.
I have four growbeds in this CRAFTS setup, I put one tablespoon into each growbed at the water inlet. Usually it will be enough, nothing is wasted since it will be circulating in the system.
This particular Fe EDTA works from ph range of 2 to 8. Most of my aquaponics set the ph is about 6.7 to 7.3, so it should work.
Ok.. that the small tips.
Where to buy;
Nine Top Trading
Drive there using Waze: http://waze.to/lr/hw284z42xf
GPS : 3.309613,101.558401
Fe EDTA in aquaponics we add to growbed either to the growbed or the fish tank. I would recommend the earlier since it will not be directly available to the fish in it undissolved form that those hungry fishes think it's fish food.
How much to add? As home setup I must say, I add only as much as it's required. They are extensive post in forums about how much to add with volume of water in your system etc but I don't bothered about it.
In aquaponics, water is constantly circulating so like ammonia in the fish tank iron will be continuously circulated in the system and the plants will uses as it needs. It is not like the foliar or fertigation method that may be excessive hence wastage upon application.
I have four growbeds in this CRAFTS setup, I put one tablespoon into each growbed at the water inlet. Usually it will be enough, nothing is wasted since it will be circulating in the system.
This particular Fe EDTA works from ph range of 2 to 8. Most of my aquaponics set the ph is about 6.7 to 7.3, so it should work.
Ok.. that the small tips.
Where to buy;
Nine Top Trading
Drive there using Waze: http://waze.to/lr/hw284z42xf
GPS : 3.309613,101.558401
Tuesday, 22 September 2015
Aquaponics Tips - Insecticide Application
Insect and caterpillar are a common threat in aquaponics setup just as in any garden. When you do aquaponics, most of the time people automatically thought it is organic. To be honest Aquaponics and Organic are two different things.
A setup can be aquaponics and organic at the same time if its follow the strict organic farming or gardening guidelines. However it will be difficult if you are just starting out on aquaponics and at the same time trying to follow the organic requirements due to too steep a learning curve. Those that has practice either aquaponics or organics for a long period of time then it will be an easier process, especially if they are already practising Organic gardening.
I had tried various organic spray to control bugs, caterpillars etc, none seems to work therefore I use non-organic insecticide to get those under control. Some aquaponics purist may not agree with this, but it's okay. Everyone are entitle to their own way of doing things.
I had use non-organic insecticide as a direct spray onto the plants in my growbed, and so far I do not have any fish killed. I follow strictly to the instruction on the label, observe all precaution and most of the time I will use a more diluted mix.
A safe way to apply non-organic insecticide is to apply them away from the growbed, this is easy if you have plants grown in pots where they are easily move to a safer environment for spraying.
Even through I practice direct spraying onto growbed plants, those plants that in pots I'll spray them away from growbed and the fish tank.
Disclaimer
This is how I practice using non organic insecticide, I'm not in any way recommending or endorsing any particular chemical, poison or manufactured product for use in the Aquaponics practice. Any usage of any poison or chemical is solely at your own risk.
A setup can be aquaponics and organic at the same time if its follow the strict organic farming or gardening guidelines. However it will be difficult if you are just starting out on aquaponics and at the same time trying to follow the organic requirements due to too steep a learning curve. Those that has practice either aquaponics or organics for a long period of time then it will be an easier process, especially if they are already practising Organic gardening.
I had tried various organic spray to control bugs, caterpillars etc, none seems to work therefore I use non-organic insecticide to get those under control. Some aquaponics purist may not agree with this, but it's okay. Everyone are entitle to their own way of doing things.
I had use non-organic insecticide as a direct spray onto the plants in my growbed, and so far I do not have any fish killed. I follow strictly to the instruction on the label, observe all precaution and most of the time I will use a more diluted mix.
A safe way to apply non-organic insecticide is to apply them away from the growbed, this is easy if you have plants grown in pots where they are easily move to a safer environment for spraying.
Even through I practice direct spraying onto growbed plants, those plants that in pots I'll spray them away from growbed and the fish tank.
Disclaimer
This is how I practice using non organic insecticide, I'm not in any way recommending or endorsing any particular chemical, poison or manufactured product for use in the Aquaponics practice. Any usage of any poison or chemical is solely at your own risk.
Subscribe to:
Posts (Atom)







